• Handlebar Grips
• Handle Bar Parts
• Handlebar Attachments

93123 Half bars

---

•General: All supplied handlebars are of the highest quality and are premium quality reproductions. Pre 1946 style have cast steel center sections (not bronze) for strength. 1946-1953 bars are correct right down to the knurling count on the riser sleeves and the cable nipple outlet contours. These are all high quality bars.

---

•93123
HANDLEBAR,38-45 W/CENTERB 1/2 bars: These bars weld into your existing center section to refurbish old bars. Comes with nut collars. Will work for most models. Old bars are either tack welded in or fully welded to the center section. Sometimes it is necessary to mill out the old bars in its casting. These bars can also be used for some earlier models.

---

•Low/medium rise: Low rise has a 2-¼ rise. Med rise has a 4 1/2 rise and is 2 narrower over all. The medium rise is a very comfortable bar.

---

•1946-1953 Handlebar position: Position bars between dampener knob and dash. Turn bars carefully from one side to the other to ensure they clear the instrument panel.

---

•Tall riders: To allow extra leg clearance, the bars can be fitted in front of the damp knob. This will look slightly weird but will give you the clearance you require or fit med rise bars.